skeendw
Member
I am trying to program a 1747-M2 EEPROM in a 1746-BAS module. I can download the program and I enter "PROG" and it says successful. I can use the XFER command and then "ROM" and then "RUN" and the program executes. My problem is, when I lose power, the BAS won't run the program from the EEPROM. I have to use the laptop to log back in and XFER the program into RAM and then RUN. I tried using PROG2, turn the power off and back on, still won't run the program once power is restored.