Justinlane03
Member
Hey all,
So I'm trying to import and old Panelbuilder32 application into FactoryTalk view Studio. I've had success doing this in the past, although not a perfect conversion. When I choose my .PBA file, FTV Studio starts to go through the import process, then just comes up "Unable to open file". On other machines, we are getting a "Server threw an exception'. On the phone with the rockwell guys, they figure an external font was causing the failure, but they are disabled.
The PV application is PV1000 Gray, through RIO Protocol. I am using Panelbuilder 3.83.01, and the FTV Studio software is 8.20. Sorry for leaving out information, just wondering if anyone had any ideas I could try?
So I'm trying to import and old Panelbuilder32 application into FactoryTalk view Studio. I've had success doing this in the past, although not a perfect conversion. When I choose my .PBA file, FTV Studio starts to go through the import process, then just comes up "Unable to open file". On other machines, we are getting a "Server threw an exception'. On the phone with the rockwell guys, they figure an external font was causing the failure, but they are disabled.
The PV application is PV1000 Gray, through RIO Protocol. I am using Panelbuilder 3.83.01, and the FTV Studio software is 8.20. Sorry for leaving out information, just wondering if anyone had any ideas I could try?