PLCS.net - Interactive Q & A

PLCS.net - Interactive Q & A (http://www.plctalk.net/qanda/index.php)
-   LIVE PLC Questions And Answers (http://www.plctalk.net/qanda/forumdisplay.php?f=2)
-   -   ABB PM581 printout needed (http://www.plctalk.net/qanda/showthread.php?t=119901)

goghie March 15th, 2019 05:06 PM

ABB PM581 printout needed
 
Hi!

I have source code one disc from one machine with ABB PM581 PLC, and I don't have software and I don't know which one should be used.
Would anybody be kind enough to make printout - I will send source privately. It's quite urgent as I need to convert it to another PLC made by different manufacturer.

Thanks in advance.

Best regards.

sigmadelta March 16th, 2019 01:18 PM

I did some quick research on the file structure of the SD Card copy you sent and found the following link:

http://www.infoplc.net/files/descarg...SD_Rev_3_2.pdf

It looks like in order to have source code, the SD Card should have had a folder called "USERPROJ", but your zip file did not contain this directory. It looks like the USERDAT and USERPRG folders are compiled versions of the code, from which you cannot extract the source code.

Hopefully someone more experienced with this ABB model and software can shed more light on this.

goghie March 16th, 2019 01:39 PM

Thank you for your info. I see now that it is Codesys, strange that there is no "SOURCE.DAT".

sigmadelta March 16th, 2019 01:46 PM

The package is actually called Control Builder or Automation Builder, and I don't know what version your program was created in.

The missing "SOURCE.DAT" is likely intentional to prevent access to the code.


All times are GMT -4. The time now is 07:51 PM.

.