Write to "current user" tag on PV+

robw53

Member
robw53
Join Date
Nov 2009
Location
south yorks
Posts
515
Hi,

Does anyone know if it's possible to write to the current username tag in a PVPlus from a logix controller?

I'm using a logix based security system for access control, but if it's possible to write to the HMI I can use the new audit function on V10 of FTVME.

Regards

Rob
 

Similar Topics

R
How to read/write changes to an existing AB FTView SE program
Hello, I am fairly experienced programming and modifying existing FTView ME programs. I have also used FTView SE to make modifications to a...
Replies
5
Views
115
Operaghost
Operaghost
A
Does Ifix 5.5 have a way to write to tags based on a level status
Hi I have a ifix 5.5 application where the operator opens a valve by clicking on a screen object. I can trace from object to data base that it is...
Replies
2
Views
63
andrewjsimpson1
A
M
GP Pro/PBIII How to write text to LS area
Hi everyone, I hope you're all doing well. I'm currently working on updating an HMI project for the GP2500, and I've encountered a bit of a...
Replies
1
Views
128
mrsv
M
J
Requesting assist with learning how to write "call" for pressure and "make" pressure on booster pump with Zelio FBD?
I've gotten to the learning curve where I can program a call for pump to come on at set point but I'm not sure how to turn the same pump off when...
Replies
1
Views
155
JoeM61
J
P
Sharing a read/write modbus register
Hi everyone, I am working on a project that needs to expose the SV (Set Value) of a temperature controller to a SCADA system. SCADA <-...
Replies
4
Views
187
OkiePC
OkiePC
Back
Top Bottom