Communication between FX3U and FX3g PLC using Ethernet Module

ankit_patel291

Member
A
Join Date
Mar 2012
Location
UK
Posts
1
Hi,

I am working on Mitsubishi PLC project.I am using two PLC below.

PLC 1 - FX3U (Master)
IP : 192.168.0.10

PLC 2 - FX3g (Slave)
IP : 192.168.0.20

I am connecting both PLC via ethernet module FX3U-ENT. I would like to transfer bit M0 to M15 from FX3G (Slave) PLC to FX3U (Master) PLC every scan cycle. FYI I am not sending any data from Master to Slave.

Please try to help me to sort it out this issue ASAP. If you have any coding example then it will really help me.

Regards,
Ankit Patel
 

Similar Topics

S
Help - Communication between FX3U & Q-Series
Hello Guys I am using two Mitsi PLCs - 1 Q-Series & 1 FX3U. The FX3U is in a remote location monitoring a level and sending it back to the Q...
Replies
1
Views
2,989
plcduck
P
S
Communication not done between Woodward controller and PhoenixIO
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Replies
0
Views
25
Sandeep Patel
S
P
Communication Between Compact Logix and Guard Logix Error
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
85
Ken Roach
Ken Roach
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
112
mk42
M
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
115
yawin
Y
Back
Top Bottom