View Single Post
Old December 7th, 2017, 02:18 AM   #7
IdealDan
Member
Malaysia

IdealDan is offline
 
Join Date: May 2017
Location: MA
Posts: 305
Friends, I've gone through the Migration pdf Guide BUT still not cleared on procedures for some of the error corrrections, Please I need assistance as I'm stuck right now. STEP BY STEP GUIDE WILL HELP PLEASE. THANKS IN ADVANCE:



1. Tag es temp: Bit Array tags are not supported. Tag will be converted as a memory tag.
RECOMMENDATION ON MIGRATION GUIDE: Change the tag address to a full word address.
WHAT PROCEDURE PLEASE?

2. Screen 2 - GENERAL VIEW: Message display object will be converted to Multistate Indicator object at (224, 88).
RECOMMENDATION ON MIGRATION GUIDE: Message display object in PB32 is same as Multistate Indicator in FT.
WHAT SHOULD I DO PLEASE?

3. Bit and LSBit triggered alarms that used a Trigger Tag with a Bit data type will only be able to trigger a single alarm after import. WHAT SHOULD I DO PLEASE?
4. Alarm message Ack option not supported.
WHAT SHOULD I DO PLEASE
5. Blinking color images are not supported.
RECOMMENDATION ON MIGRATION GUIDE:
FT does not support Blinking colour image.
WHAT SHOULD I DO PLEASE?

6.Tag pt502: The maximum value for this tag was invalid and has been set to the maximum valid value based on the tag's data type.
RECOMMENDATION ON MIGRATION GUIDE: Verify that the tag data type and maximum value are correct HOW?

7. Screen 3 - 82PK961A_B: Print flag for multistate indicator or message display at (257, 323) not supported.
WHAT SHOULD I DO PLEASE?
I'LL BE GRATEFUL FOR YOUR HELP

Last edited by IdealDan; December 7th, 2017 at 02:20 AM.
  Reply With Quote