Malador
Lifetime Supporting Member
I bought a used micrologix 1100 and I'm having a lot of trouble connecting. My problem may have something to with the processor being faulted, I really don't know. The LCD says says "remote" and the fault light flashes.
Anyway I've tried to configure the IP address with BOOTP-DHCP Server following the instructions on the attached PFD. I got to page 12 where you "disable bootp-dhcp." After 20 minutes and 21 failed attempts, I gave up and left for awhile. When i came back windows had preformed an update and restarted. Now my request and retention history is blank. I'm at a loss at what to do at this point. Any help is GREATLY appreciated.
Anyway I've tried to configure the IP address with BOOTP-DHCP Server following the instructions on the attached PFD. I got to page 12 where you "disable bootp-dhcp." After 20 minutes and 21 failed attempts, I gave up and left for awhile. When i came back windows had preformed an update and restarted. Now my request and retention history is blank. I'm at a loss at what to do at this point. Any help is GREATLY appreciated.