View Single Post
Old April 12th, 2007, 02:02 PM   #8
gtsuport
Member
United States

gtsuport is offline
 
Join Date: Feb 2005
Location: Grand Rapids, MI
Posts: 1,209
Just try using AR9 for the number of bytes received portion of the instruction.

Another trick, just to check things out, put a normally open 253.14 (always off bit) in the enable line of the RXD. Send your data, then take a look at the value in AR9. This will verify the number of bytes being received.

Hope this will help.
  Reply With Quote