ToolGuyFred
Member
I have a piece of kit controlled by a Toshiba M20 Prosec EX PLC. The PLC has an output permanently on so is currently unusable. I would like to back it up before it is repaired (or better still replaced). There is no hardcopy of the ladder listing.
I have what looks like the correct programming cable and software which should do the job. Unfortunately the software constantly whinges about the lack of a hardware key and has no useful functionality. I can't find the appropriate dongle anywhere.
I need to contact Toshiba to rent/borrow/buy the hardware key I need. I can't find anything remotely related to PLCs on Toshiba's UK web site - anyone got a contact name + number please?
I have what looks like the correct programming cable and software which should do the job. Unfortunately the software constantly whinges about the lack of a hardware key and has no useful functionality. I can't find the appropriate dongle anywhere.
I need to contact Toshiba to rent/borrow/buy the hardware key I need. I can't find anything remotely related to PLCs on Toshiba's UK web site - anyone got a contact name + number please?