Does anyone have the actual pinout of the Toshiba EX40 Plus / D100 Programming interface/connector RJ45 socket please?
OR: Can anyone tell me what signal conditions I should see on each of the 8 pins of the socket please?
Thanks to many very helpful previous posters, I've seen various threads about adapters and cables, and I have the EX40 Plus Manual, and various programs that work on my XP laptop.
Before I tried to connect up and interrogate the EX40Plus, I checked the RJ45 Socket pins and found pins 1,2,3 and 4 all at +5v, and pins 5,6,7 and 8 all at 0v. Pins 5-8 all had continuity to the negative side of the Backup Battery too. Not at all what I was expecting.
If anyone has an actual EX40Plus they can check on I'd appreciate it.
Thanks in advance.
OR: Can anyone tell me what signal conditions I should see on each of the 8 pins of the socket please?
Thanks to many very helpful previous posters, I've seen various threads about adapters and cables, and I have the EX40 Plus Manual, and various programs that work on my XP laptop.
Before I tried to connect up and interrogate the EX40Plus, I checked the RJ45 Socket pins and found pins 1,2,3 and 4 all at +5v, and pins 5,6,7 and 8 all at 0v. Pins 5-8 all had continuity to the negative side of the Backup Battery too. Not at all what I was expecting.
If anyone has an actual EX40Plus they can check on I'd appreciate it.
Thanks in advance.