Hi Guys, I am working on DH+ between two Contrologixs. Each has 13 slots. I put 1756-dhrio in slot 0, and processor 1756-L61 in slot 3. I just put one rung there: ---||----(MSG)---. MSG setup screen is setup as read for one and write for another one. After I finished connecting a cable between and configuring RSlinx for DH+, I can see Ch_A is used for DH+ because I can see another processor on the link by using RSlinx. CH_a OK light is solid green too.
But each time I download the program into the processor, there is module fault: code 16#ff00, Connection Request Error: No connection instance. What does that mean?
Another thing is how to configure the path of CIP read and write? Based on the above system, could you please let me know the exact path for each part. The link ID for one CH_A is 1 another one is 3.
Thanks in advance.
But each time I download the program into the processor, there is module fault: code 16#ff00, Connection Request Error: No connection instance. What does that mean?
Another thing is how to configure the path of CIP read and write? Based on the above system, could you please let me know the exact path for each part. The link ID for one CH_A is 1 another one is 3.
Thanks in advance.