Searched on AB website for eds file.
http://www.ab.com/networks/eds/cgi-bin/search.cgi
There is no 1756-EN2T D
This is what is listed:
Rockwell Automation/Allen-Bradley Details | Download Communication Adapter 1756-EN2TP 1756-EN2TP 10 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2T 1756-EN2T 2 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2T 1756-EN2T 3 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2T 1756-EN2T 4 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2T 1756-EN2T 5 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2T 1756-EN2T 10 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2T/A 1756-EN2T/A 1 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2TR 1756-EN2TR 2 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2TR 1756-EN2TR 4 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2TR 1756-EN2TR 5 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2TR 1756-EN2TR 10 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2TSC 1756-EN2TSC 5 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2TSC 1756-EN2TSC 10 1
So I downloaded all the EN2T files with a version 10 and installed them in RSLogix5000 using the eds tool.
I think this is the correct eds file, but not sure: 0001000C00A60A00.eds
I still have the yellow question mark in the hardware config of the project.
Right click backplane in HW congif tree and select discover.
...and RS discovers all the EN2T ver 10.6 in the rack and they seem to be correctly identified. "no action needed"
Still have yellow question mark in project tree and can not go to properties of device.
Try to add a new EN2T, and the version tab only allows up to version 5.
As if no eds files were added.
Closed everything and rebooted twice, went to get water, did 2 spins for Tuesday. Twos day...
Still doesn't work, no change.
Everything is fine with other RSLogics install on other PC, so I know it is a "simple" eds issue.
Any ideas?
http://www.ab.com/networks/eds/cgi-bin/search.cgi
There is no 1756-EN2T D
This is what is listed:
Rockwell Automation/Allen-Bradley Details | Download Communication Adapter 1756-EN2TP 1756-EN2TP 10 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2T 1756-EN2T 2 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2T 1756-EN2T 3 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2T 1756-EN2T 4 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2T 1756-EN2T 5 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2T 1756-EN2T 10 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2T/A 1756-EN2T/A 1 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2TR 1756-EN2TR 2 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2TR 1756-EN2TR 4 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2TR 1756-EN2TR 5 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2TR 1756-EN2TR 10 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2TSC 1756-EN2TSC 5 1
Allen-Bradley Details | Download Communications Adapter 1756-EN2TSC 1756-EN2TSC 10 1
So I downloaded all the EN2T files with a version 10 and installed them in RSLogix5000 using the eds tool.
I think this is the correct eds file, but not sure: 0001000C00A60A00.eds
I still have the yellow question mark in the hardware config of the project.
Right click backplane in HW congif tree and select discover.
...and RS discovers all the EN2T ver 10.6 in the rack and they seem to be correctly identified. "no action needed"
Still have yellow question mark in project tree and can not go to properties of device.
Try to add a new EN2T, and the version tab only allows up to version 5.
As if no eds files were added.
Closed everything and rebooted twice, went to get water, did 2 spins for Tuesday. Twos day...
Still doesn't work, no change.
Everything is fine with other RSLogics install on other PC, so I know it is a "simple" eds issue.
Any ideas?