NeedHelp2019
Member
Hello all,
I have been working on repairing a Schneider XBTGT5330 for an end user.
There is no CF card present but after fitting new CCFLs I can see that the unit powers up with customer application running well.
I have Vijeo Designer 6.2 and the XBTZG935 USB cable.
Is it possible to upload a copy of the application and settings on to the laptop/PC with this cable.
The USB option is ghosted out in the Backup Manager and Target settings?
I read somewhere that the USB may not be supported on this model as it is not a FRONT USB Connection. There are USB ports on the side of the HMI so did not think this would be an issue.
Hoping someone can shed some light on this for me.
I have been working on repairing a Schneider XBTGT5330 for an end user.
There is no CF card present but after fitting new CCFLs I can see that the unit powers up with customer application running well.
I have Vijeo Designer 6.2 and the XBTZG935 USB cable.
Is it possible to upload a copy of the application and settings on to the laptop/PC with this cable.
The USB option is ghosted out in the Backup Manager and Target settings?
I read somewhere that the USB may not be supported on this model as it is not a FRONT USB Connection. There are USB ports on the side of the HMI so did not think this would be an issue.
Hoping someone can shed some light on this for me.