In a Water Plant I have a SLC 50/4 as a Master PLC. Serial port is connected to radio modem. DH+ is connected to two other SLC 50/4's, three DH+ Panelviews, and DH+ Card in a Computer with RS View. The other two SLC 50/4's have the serial port unused.
Want to move toward ethernet in the future. Considered Flex I/O with ethernet by using either a DH+ to Ethernet bridge or a 1761-NETENI on one of the open serial ports.
I am learning Flex I/O requires a PLC to control its configuration and messaging.
Is there an Ethernet I/O that can be configured and read by at least my RS View??
Want to move toward ethernet in the future. Considered Flex I/O with ethernet by using either a DH+ to Ethernet bridge or a 1761-NETENI on one of the open serial ports.
I am learning Flex I/O requires a PLC to control its configuration and messaging.
Is there an Ethernet I/O that can be configured and read by at least my RS View??