Rsflipflop256
Lifetime Supporting Member
I have a Cmore screen which is communicating to the DL06 in BCD and need to create a timer that works in real numbers for a test, I simply need to make the timer hold open an output for 8 hours.
Ive read a bunch and this thread https://www.plctalk.net/qanda/showthread.php?p=924337#
seems applicable, but being new at Direcsoft I might need a few pointers.
Need to Load 2 consecutive segment BCD into the PLC and have it do the conversion into a REAL for timer and then shoot it back to the screen to display it?
Would appreciate any help, thanks!
Ive read a bunch and this thread https://www.plctalk.net/qanda/showthread.php?p=924337#
seems applicable, but being new at Direcsoft I might need a few pointers.
Need to Load 2 consecutive segment BCD into the PLC and have it do the conversion into a REAL for timer and then shoot it back to the screen to display it?
Would appreciate any help, thanks!