Good Afternoon ,
I putting a Rockwell Automation Safety System. I was wondreing if a
TLS-Z GD2 Guard Locking Switch would work well with a 440C-CR30-22 BBB
Safety Relay that is programmed with CCW software.
Using the 440C-CR30 , can you only use one device , such as a Guard Locking Switch , Light Curtain , etc. or can use multiples ? I imagine you can just add modules to it , correct ?
Thanks so much for your help ,
I putting a Rockwell Automation Safety System. I was wondreing if a
TLS-Z GD2 Guard Locking Switch would work well with a 440C-CR30-22 BBB
Safety Relay that is programmed with CCW software.
Using the 440C-CR30 , can you only use one device , such as a Guard Locking Switch , Light Curtain , etc. or can use multiples ? I imagine you can just add modules to it , correct ?
Thanks so much for your help ,