Ones_Zeros
Member
Hey
I have another crazy question regarding the "Examine Off" bit?
I have a situation to were if I toggle a "Examine Off" bit it will shut down a process. So if the bit goes true it shuts down.
Now this may not be the best way to do this but its what I have currently.
Some questions I have are:
1. If i configure Wonderware button as a "Toggle" action on the Examine Off bit the process goes down.
This is OK and all good....Now
2. I have been struggling with the PLC code to wite this to were the bit holds in the "True" or "1" state until a reset is pressed to put it back into the "off" state.
3. Once back into the off state, then the unit is cleared to restart.
Can this be done with what I have here to work with?
If so can you guys instruct me on the correct PLC logix to accomplish this?
thanks,
I have another crazy question regarding the "Examine Off" bit?
I have a situation to were if I toggle a "Examine Off" bit it will shut down a process. So if the bit goes true it shuts down.
Now this may not be the best way to do this but its what I have currently.
Some questions I have are:
1. If i configure Wonderware button as a "Toggle" action on the Examine Off bit the process goes down.
This is OK and all good....Now
2. I have been struggling with the PLC code to wite this to were the bit holds in the "True" or "1" state until a reset is pressed to put it back into the "off" state.
3. Once back into the off state, then the unit is cleared to restart.
Can this be done with what I have here to work with?
If so can you guys instruct me on the correct PLC logix to accomplish this?
thanks,