MartyMaucher
Member
Trying to read analog inputs from 1746-NI8 card, but values show 0 and channel status LEDs never come on.
Details:
- SLC 5/05, 1747-L551 processor
- Analog input card's module status light is on steady green
- 6ma current wired in channel 0
- Configure channel for 4-20mA
- Using RSLogix 500, UKResearch.RSS .zip file attached below
I've tried to set the Data Format for 1746-NI4 format, and User Scaled Range, yet the channel LED never comes on and always read 0.
Any ideas?
Thanks,
MM
Details:
- SLC 5/05, 1747-L551 processor
- Analog input card's module status light is on steady green
- 6ma current wired in channel 0
- Configure channel for 4-20mA
- Using RSLogix 500, UKResearch.RSS .zip file attached below
I've tried to set the Data Format for 1746-NI4 format, and User Scaled Range, yet the channel LED never comes on and always read 0.
Any ideas?
Thanks,
MM