stuofsci02
Member
Hi All,
I am using the new ALMA and ALMD alarm instruction in RSLogix5000 V16 and am very happy with them. I have FactoryTalk View SE CPR9 and I understand that it can be setup to use Device Based alarming, so that the PLC stores all the alarm info in the alarm instruction and just passes the data to the HMI.
Can anyone walk me through or point me in the right direction on how to get FactoryTalk View SE to subscribe to these alarms.
This will save me from making tags in View the old school way.
Thanks,
Stuart
I am using the new ALMA and ALMD alarm instruction in RSLogix5000 V16 and am very happy with them. I have FactoryTalk View SE CPR9 and I understand that it can be setup to use Device Based alarming, so that the PLC stores all the alarm info in the alarm instruction and just passes the data to the HMI.
Can anyone walk me through or point me in the right direction on how to get FactoryTalk View SE to subscribe to these alarms.
This will save me from making tags in View the old school way.
Thanks,
Stuart