TheWaterboy
Lifetime Supporting Member + Moderator
I have a chance to try something new now that the venerable PV600 had finally died.
I hear lots of good about the crimson series but I don't see a DH+ comm option available. I am using the DF1 port of the PLC5 for telemetry so DH+ is all thats left.
The PLC that will someday also be replaced replaced will be Ethernet so I would need to have that in place as well.
I have to replace over 30 of these and I would like to standardize on an HMI. This is my chance to test one out but DH+ is my limiting factor.
Thoughts?
I hear lots of good about the crimson series but I don't see a DH+ comm option available. I am using the DF1 port of the PLC5 for telemetry so DH+ is all thats left.
The PLC that will someday also be replaced replaced will be Ethernet so I would need to have that in place as well.
I have to replace over 30 of these and I would like to standardize on an HMI. This is my chance to test one out but DH+ is my limiting factor.
Thoughts?