CaspianSage
Member
Do any of you have any experience with Mean Well power supplies?
I am looking for some low cost 5, 12 and 24 VDC din rail mt.
For the 5, I need 140mA MIN, but want up to 3amps at 5V dc +0.25V with less than 50mV ripple, peak-to-peak.
just wondered if these are sufficient for not critical application in a clean environment an reasonably clean power source or if i should look elsewhere
Thank you!
I am looking for some low cost 5, 12 and 24 VDC din rail mt.
For the 5, I need 140mA MIN, but want up to 3amps at 5V dc +0.25V with less than 50mV ripple, peak-to-peak.
just wondered if these are sufficient for not critical application in a clean environment an reasonably clean power source or if i should look elsewhere
Thank you!