ACS 800 Controlled by S7-300 CPU

qwemx

Member
Join Date
Jul 2017
Location
Earth
Posts
195
I have ABB ACS 800 Drive being controlled from S7-300 CPU
the drive is turning on but the motor is not rotating

i have attached the program and drive parameters hopefully someone can help me find the problem.
https://ufile.io/epgi9
 

Similar Topics

Is it possible to connect a PC to the mini console's RJ12 connector? use an RJ12/DB9 cable?
Replies
1
Views
949
I need to see parameters 03 and 04 but it jumps from 99 to 10 on the acs 800. Parameter 16.02 says open.. can use some help here.
Replies
0
Views
1,046
Hi ,, Could you please any one help me, How to run abb acs 800 drive as encoder less mode by setting parameters on parameter screen.
Replies
2
Views
1,830
We have simulated the complete set up with for ABB ACS800 Drive outside panel. But we keep getting alarm “ DC UNDER VOLTAGE “ On Display we can...
Replies
5
Views
3,072
Back
Top Bottom