VFD Vector Control

Mr_B

Member
Join Date
May 2005
Posts
79
Can someone recommend a good site to explain Vector Control on a VFD please. I google'd it but this PC I'm using takes about 10 minutes to open one site and that's very frustrating.

Thank you.
 

Similar Topics

I would like to monitor the torque current parameter on a Powerflex 525 drive with embedded ethernet but my understanding is that the drive must...
Replies
7
Views
7,019
There is a Permanent Magnet mode for the vfd, but it seems to run much better in sensor-less vector mode. Anyone know if this will harm the...
Replies
0
Views
1,627
I routinely use a "standard" VFD for controlling air flow of multi-stage centrifugal blowers. A prospective customer recently indicated "we were...
Replies
5
Views
3,196
So i need to communicate my VFD (LS Electric iS7) with XGL PMEB module i successfully set the gsd file now i cant figure out how the data works...
Replies
0
Views
47
Hi, I need to replace damage control board of 37kw Danfoss fc360, I have a control board of 30kw of same Model FC360, how to change that board...
Replies
0
Views
49
Back
Top Bottom