djedesign1
Member
My customer is desperate to upgrade an old (30+) process line that has Cutler Hammer D100A PLCs (Toshiba EX40H) and D800 Messsage Displays.
To avoid re-inventing the wheel, we want to suck the programs from the PLCs and the Message Display. The PLCs are no problem as we know someone with the old software & dongle.
The Message Displays are the issue. Apparently we need the old DOS "Micro PanelMate Configuration Editor"
Help
To avoid re-inventing the wheel, we want to suck the programs from the PLCs and the Message Display. The PLCs are no problem as we know someone with the old software & dongle.
The Message Displays are the issue. Apparently we need the old DOS "Micro PanelMate Configuration Editor"
Help