Hi Guys,
The electricians accidentally pulled a two conductor cable for the RS-232 communications. The seals are poured. Is it okay if I use the shield wire for the GND pin?
I know this is not the proper way and you should have a three conductor cable with shield. The distance is about 70ft between buildings.
Let me know what you guys think?
The electricians accidentally pulled a two conductor cable for the RS-232 communications. The seals are poured. Is it okay if I use the shield wire for the GND pin?
I know this is not the proper way and you should have a three conductor cable with shield. The distance is about 70ft between buildings.
Let me know what you guys think?