G'day All,
Having some trouble with an omron devicenet network with nodes going into bus fault. CPU is a CS1G with a DRM21-V1 devicenet maser.
Network has had no previous issues until the last 5 weeks where omron V1000 drives (Yaskawa) are randomly dropping off the network and need to be reset.
Would a wrong version EDS file in integrator cause any issues with comms?
Having some trouble with an omron devicenet network with nodes going into bus fault. CPU is a CS1G with a DRM21-V1 devicenet maser.
Network has had no previous issues until the last 5 weeks where omron V1000 drives (Yaskawa) are randomly dropping off the network and need to be reset.
Would a wrong version EDS file in integrator cause any issues with comms?