DaveMac
Member
I am having trouble finding a written procedure for how to use a PanelView300 as the Operator Interface for a CompactLogix. I would think this is a common setup. I just need to know how to create Tags for the PV300 to read and write to. I am usually work with View and Computers rather than PanelBuilder.
PV300 CompactLogix Read/Write
Speed Speed/Real Y/N
Auto_Manual Auto_Manual/Bit Y/Y
Setpoint Setpoint/Int Y/Y
Lets say I want the above tags. All the examples from Rockwell say SLC to PV so the MSG command stuff looks different. I have the following command.
PV300 CompactLogix Read/Write
Speed Speed/Real Y/N
Auto_Manual Auto_Manual/Bit Y/Y
Setpoint Setpoint/Int Y/Y
Lets say I want the above tags. All the examples from Rockwell say SLC to PV so the MSG command stuff looks different. I have the following command.