Having an issue with these: http://www.automationdirect.com/static/specs/proxacinductivev.pdf
Using them to sense whether doors are opened or closed. Blue lead is AC hot, brown connected to input on a Zelio programmable relay.
With no object in sensing distance, I get a bleed-through of between 80 and 85 volts, which is above the threshold of the input. Thus, the input is always on.
I have a tech support opened with AD, but won't get an answer until sometime tomorrow. I was hoping someone will have a solution. I'm suspecting it'll be a series resistance...
Using them to sense whether doors are opened or closed. Blue lead is AC hot, brown connected to input on a Zelio programmable relay.
With no object in sensing distance, I get a bleed-through of between 80 and 85 volts, which is above the threshold of the input. Thus, the input is always on.
I have a tech support opened with AD, but won't get an answer until sometime tomorrow. I was hoping someone will have a solution. I'm suspecting it'll be a series resistance...