stupidav
Member
I am looking at a Print out and I am trying to understand what is happinging and after quite a bit of reading there is still a lot I a am lost at.
What is the UN. The M 36.0 is just Memory Bit 0 of Byte 36.
I know that the SP* is to call a different areas of code. but what is the difference between A and B in this example.
I am not sure what the Name does or the E does. DB 11 is just full of Hex Values (KH 0000 and stuff like that).
Code:
Segment 2 :
UN M 36.0
SPB FB 181
NAME E DB 11
***
Segment 3 :
SPA PB 1
***
What is the UN. The M 36.0 is just Memory Bit 0 of Byte 36.
I know that the SP* is to call a different areas of code. but what is the difference between A and B in this example.
I am not sure what the Name does or the E does. DB 11 is just full of Hex Values (KH 0000 and stuff like that).