Negative edge detection

leka

Member
L
Join Date
Oct 2010
Location
Aarhus
Posts
9
Hi I need a negative edge detection in Step5. I use it here in step7 like this - (N) -.

But how can I program it in Step5?
 

Similar Topics

D
Negative edge detection
Hello every body!!! We have siemens s7200 Iam trying to detect the relise of the push botton. That is to say the transiation of 1 to 0. I have...
Replies
9
Views
2,409
danielchen
D
N
Positive and Negative edge detection
How to make in STL(S7-300) potivite or negative bridge. I want to start pump only on positive edge of the bit "start_pump"
Replies
7
Views
4,299
Lare
L
V
Micro850 + Sensor: 1 Axis can not move in negative direction when working together with sensor
Hi everyone, I am working with micro850, a proximity sensor (FOTEK, PL-05P) and a 3DOF serial arm robot. I use MC_MoveRelative to control the...
Replies
1
Views
61
vhs
V
J
Negative Current - Analog Output
I am troubleshooting an actuator which is not responding to the plc code. The range in the channel of the Allen Bradley 1756-OF8 Analog card is...
Replies
1
Views
627
GaryS
G
M
Modbus returning negative values
I have 3 koyo PLC's in series. The 1st and 3rd are reporting values correctly but the 2nd is reporting negative values. The values in the PLC and...
Replies
3
Views
1,418
drbitboy
drbitboy
Back
Top Bottom