Hi All,
I have two Mitsubishi Q series PLC's ( Q03UDECPU ).
Both are connected via a basic ethernet switch.
I need to read and write about 100 words of data between each PLC.
This is not a high speed application.
This is a new project using GX Works 2.
What is the best way to achieve this task.
Any help or examples appreciated.
Thanks in advance.
I have two Mitsubishi Q series PLC's ( Q03UDECPU ).
Both are connected via a basic ethernet switch.
I need to read and write about 100 words of data between each PLC.
This is not a high speed application.
This is a new project using GX Works 2.
What is the best way to achieve this task.
Any help or examples appreciated.
Thanks in advance.