emomorales
Lifetime Supporting Member
Sorry I'm a beginner to the PLC world. I've managed to make my way through programming a few PLC and HMI's by reading some of the posts here, which are very helpful. But I'm currently having trouble figuring out how two Micrologix 1100's are communicating with each other. I have a Micrologix 1100 (PLC 1) and a panel view 1000 connected to a Ethernet switch in one building. I then have a Micrologix 1100 (PLC 2) connected to a Ethernet switch in another. The HMI gets readings from both PLC's, but when i look in the communications of the HMI I only see PLC 1. When I have a input triggered from a well float on PLC 2 it goes to a OTE N7:37, then opens a XIO N7:37 in PLC 1 so I know they are linked. I want to build this on my bench and make changes before I do anything in the field. Don't want to screw up anything.
Any help would be appreciated.
Any help would be appreciated.