How can able to get Tx and Rx Packet/Byte Values in PLC

Velpandian P

Member
V
Join Date
Aug 2019
Location
Tamilnadu
Posts
4
Hi everyone!

I just want to get the transmit and receive data bytes nor packets value from rs-232 com port in compactlogix L32E controller. Else, please give some solution about to get those data bytes/packets value in wonderware intouch.

Please assist me, if anyone have any idea about it.
 

Similar Topics

D
SLC 500 - unable to verify settings due to packet timeout
When I try to connect my SLC 500 to my deskptop it tells me "unable to verify settings due to packet timeout" I already bought a null modem cable...
Replies
13
Views
16,153
bernie_carlton
bernie_carlton
M
unable to verify settings due to packet timeout! Check all cables and configuration a
I am trying to configure RS Linx to talk to a Micrologix 1200. The micrologix was connected to a panelview so I took out its RS-232 cable and...
Replies
1
Views
6,417
Ken Roach
Ken Roach
A
Magnetic cable tie mount, effect on signals
I am considering using a "magnetic cable tie mount" like this one: https://www.grainger.com/product/MAG-MATE-Magnet-with-Zip-Tie-Holder-49M018 It...
Replies
2
Views
65
JesperMP
JesperMP
T
Cable Numbering
I have an existing machine that we are adding some functionality. Currently every cable such as a cable going out to a 4-20 psi sensor for example...
Replies
5
Views
210
01101
0
D
Cable length calculation
Hello everybody, I believe that I will find experts here who have already solved a similar topic. I need to calculate the length of the...
Replies
7
Views
339
arpus4KM
A
Back
Top Bottom