Communication SLC 5/04 to ML1100

Hello Friends

I need to share some bits and integers between SLC 5/04 and a ML1100.

I am thinking in Lantronix UDS1100 connected to a switch, but I am not sure if this device could do that.

Have you done this before?

Thanks in advance

I think you need a version that supports industrial protocols:

https://www.lantronix.com/products/uds1100-iap/

I have not used that device, but have used its cousin, the Digi One IAP to successfully put SLC 5/04 PLCs onto a controls LAN where they could send and receive data from other A/B PLCs and HMIs.