Softing Profibus Configurator
- Thread starter Avatar_41
- Start date
Steve Bailey
Lifetime Supporting Member + Moderator
Have you tried ABB? Because if you're asking where you can find an unauthorized copy of copyrighted software, go ask somewhere else.
AlfredoQuintero
Lifetime Supporting Member
Hi Avatar_41, Steve_Bailey, the Softing Profibus configurator is free of charge for Softing Profibus masters users. You need to register in the Softing website. Let me know if you need support with it.
https://industrial.softing.com/prod...-dual-channel-pci-express-interface-card.html
https://industrial.softing.com/prod...-dual-channel-pci-express-interface-card.html
Steve Bailey
Lifetime Supporting Member + Moderator
My initial reaction was to the words "with crack", which the OP edited out a few minutes after I posted.
Similar Topics
G'day
Has anyone used the Softing Profibus tester (part no PB-T3)?
We are considering getting one for our plant.
Also, how well does it support...
Hi, a customer has an installation on which a Yamatake DCS monitors about 60 Rosemount FF temperature transmitters. The DCS is a Mobdus RTU master...
Hello:
Has anybody used Codesys as a Windows Profibus master using Softing's ProfiUSB master board? There is no good documentation and I am...
Hello people,
have somebody an experience with Softing Gateway? I need to connect Profinet devices to EthernetIP network. Looks like not very...
I got an email from a supplier this morning about a new SQL bridge module for the 1769 platform, and thought some folks here might find it useful...
