I've got a client who needs to measure a flow rate somewhere in the range of 10-20L/s through a 100mm pipe. Ordinarily, not a big drama, but in this case the liquid in the pipe will be -50°C. I've got a few enquiries out with various suppliers but I thought I'd see if the good folk of this forum might be able to point me in the direction of a few options.
I'm thinking it might end up having to be a non-contact measurement method, or a DP sensor across an orifice plate. Open to any and all suggestions!
Electrically I just need a 4-20mA output and would prefer a 24VDC supply.
I'm thinking it might end up having to be a non-contact measurement method, or a DP sensor across an orifice plate. Open to any and all suggestions!
Electrically I just need a 4-20mA output and would prefer a 24VDC supply.