PLC Knight Rider programme.

Here is another way for GX Developer FX version 8.25B using 1 timer and comparison instructions, two comparison branches, top to shift from Y0 to Y7, and bottom to display light from Y7 to Y0. Each output will be on for 0.5 seconds, including Y7.
 
Last edited:

Similar Topics

S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
9
Views
160
mburtis
M
N
Conveyor PLC
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Replies
5
Views
184
geniusintraining
geniusintraining
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
38
Tecnolaundry
T
Mas01
S7-TIA Portal: How can I make a project if I've only got the code loaded on the PLC?
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
10
Views
247
bkottaras
B
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
64
Alibaba07
A
Back
Top Bottom