hello
friends
I tried to communicate plc eberle 511s with pc but i failed and a message appears (communication eror).
Then i tried to set the plc , the following was the result :
baud rate 300 fixed (can not be adjusted)
barity bit odd fixed
stop bit 1 fixed
data bits 8 fixed
com port 1 adjustable.
Also we adjust the pc as plc setting . but the same problem appears.
Please your colaboration & help in solving this problem
best regards.
friends
I tried to communicate plc eberle 511s with pc but i failed and a message appears (communication eror).
Then i tried to set the plc , the following was the result :
baud rate 300 fixed (can not be adjusted)
barity bit odd fixed
stop bit 1 fixed
data bits 8 fixed
com port 1 adjustable.
Also we adjust the pc as plc setting . but the same problem appears.
Please your colaboration & help in solving this problem
best regards.