Hi... I'm working on a project where we are modifying an existing system. We are adding a 1756-ib32 input card to a spare slot on a existing rack. As the card is brand new the version number is 3.006. The processor is at rs logix 5000 v10. I have added the input card to the hardware configuration and downloaded to the plc. When online it shows the new module in fault with the following error message: (code 16#0317) Connection request error. Connection not scheduled. Rs logix will only let me assign version 2.1 for the input card (this is what makes me think it isn't compatible) so I changed the setup to disable the electronic keying of the new input card but still no joy.
Hope this makes sense to some of you and any information would be appreciated!
Thanks
Hope this makes sense to some of you and any information would be appreciated!
Thanks