Lyndon
Guest
L
I have checked the plc's at www.TRI-plc.com. And I found that their E10 npn is suitable for my project and have the right price for my few input and output need of my project. Also the E10 can operate with 12 VDC supply, normally I know Plc operates with 24 VDc. But the 12 VDC is very appropriate for the environment my plc should work.
Also my project needs to work with RS232 communication with Modem or wireless phones, which the E10 has no tools to communicate with.
do you know of a plc that:
works with 12 VDC power supply
Communicates with RS232 modem communication and AT commands
data memory manipulation to communicate with RS232 modem
has 6-8 inputs and 6 outputs only
Dicrete i/o is sufficient
Small size
A price range of below 100 USD would be much appreciated.
REgards,
Lyndon
Also my project needs to work with RS232 communication with Modem or wireless phones, which the E10 has no tools to communicate with.
do you know of a plc that:
works with 12 VDC power supply
Communicates with RS232 modem communication and AT commands
data memory manipulation to communicate with RS232 modem
has 6-8 inputs and 6 outputs only
Dicrete i/o is sufficient
Small size
A price range of below 100 USD would be much appreciated.
REgards,
Lyndon