I have water meter equiped with optoelectronic pulser as follow:
Switch type: IR reflex light barrier to DIN 19234; plug-in design
Switch voltage: 8.2 VDC
Switch current: < 1.2 mA
Quiescent current: > 2.1 mA
Can I wire the pulser output directly to PLC input 24VDC?
Any suggestion will be appreciated.
Switch type: IR reflex light barrier to DIN 19234; plug-in design
Switch voltage: 8.2 VDC
Switch current: < 1.2 mA
Quiescent current: > 2.1 mA
Can I wire the pulser output directly to PLC input 24VDC?
Any suggestion will be appreciated.