I have used one like this for almost 20 years, handy to have in the trunk
I have been using the exact same thing for10+ years.
I am now on my second one, because the first one somehow walked of the job site.
I have used one like this for almost 20 years, handy to have in the trunk
I have been using this one for years.
Fits everywhere and can also be used as a tool bag to the job site.
We use a table from table tote
www.pctabletote.com
part# 3000090
when disassembled, its the size of a laptop.
when you need it, slide the lid open. extend the legs, and you're ready.
Note,
I am not associates with this company, or get any compensation.
james
I can confirm, the pctabletote fits inside a 5 gallon bucket, along with extension cord.
Bucket becomes seat.
I can't find the taller version you are referencing using my amazon-fu. Your link goes to the 13.5", which is what I purchased. It did come with the cell phone holder and the beer holder and an a car antennae looking thing for holding up papers. I would NOT pay 80 dollars for the extended version of it. It's pretty much the exact size of a laptop when stored. It's light. It would be nice if it were taller though. It is a bit "top heavy" after it is set up. It's not really "industrial" by any means, but convenient in a control room.
30 bucks seems about right. I bought it and got all set up with my 5 gallon bucket a few times, and it worked out so well, that I figured I would use it all the time. But in reality, I still find myself with laptop cradling in left hand - and typing with right hand.