OkiePC
Lifetime Supporting Member
This heavily loaded SLC kicked me offline during an online edit and now refuses to cancel or accept the pending edits. This is not the first time this has happened with this particular SLC 5/05. In the past, we have cycled power and downloaded the program to resolve this.
The processor status (structured) shows S:33/11,12 "Online edits disabled"
Changing the radix to binary:
S:33/11=1, S:33/12=0
I've read some tech notes on this issue, but I am still left with a question:
What would happen if I manually clear the status bit S:33/11 while the program is running?
I really don't want to shut down the whole area to follow the recommendation to cycle power to the SLC or download the program.
Thanks,
Paul
The processor status (structured) shows S:33/11,12 "Online edits disabled"
Changing the radix to binary:
S:33/11=1, S:33/12=0
I've read some tech notes on this issue, but I am still left with a question:
What would happen if I manually clear the status bit S:33/11 while the program is running?
I really don't want to shut down the whole area to follow the recommendation to cycle power to the SLC or download the program.
Thanks,
Paul