John Morris
Lifetime Supporting Member
Morning
I have created an alarm list in FTV ME, this time i used DINTs to bank certain alarm together such as individual tank alarms or system alarms like low air pressure or low water flow.
In this situation the number (1) is used four times in the trigger value.
My question is when TANK_ONE_ALARM.1 with a trigger of (1) is set (TANK ONE heater in overload) will it also trigger TANK_TWO_ALARM.1 with a trigger value of (1) (TANK TWO heater in overload)
Thank you for helping clear up this confusion.
I have created an alarm list in FTV ME, this time i used DINTs to bank certain alarm together such as individual tank alarms or system alarms like low air pressure or low water flow.
In this situation the number (1) is used four times in the trigger value.
My question is when TANK_ONE_ALARM.1 with a trigger of (1) is set (TANK ONE heater in overload) will it also trigger TANK_TWO_ALARM.1 with a trigger value of (1) (TANK TWO heater in overload)
Thank you for helping clear up this confusion.