theColonel26
Lifetime Supporting Member
Read Tag from Rockwell PLC from Codesys 3.5?
Rockwell PLCs would be 5370s, 5380s, 5570s, and 5580s etc.
It seems everyone's EtherNet/IP Adapters aren't tag aware, and they just use the Base CIP protocol on top of Ethernet. I assume Codesys's is the same way but I will ask anyway.
Is there a way to communicated with a Rockwell PLC over Ethernet/IP using Tag names? or would you have to create some convoluted Middleman bridge to do it?
Note: Cross posted on Reddit.
Rockwell PLCs would be 5370s, 5380s, 5570s, and 5580s etc.
It seems everyone's EtherNet/IP Adapters aren't tag aware, and they just use the Base CIP protocol on top of Ethernet. I assume Codesys's is the same way but I will ask anyway.
Is there a way to communicated with a Rockwell PLC over Ethernet/IP using Tag names? or would you have to create some convoluted Middleman bridge to do it?
Note: Cross posted on Reddit.
Last edited: