ford50killa
Member
Howdy folks.
I am need of some help here. I have a 1769-L23E processor communicating to Wonderware Intouch. I just got on this project. I am trying to find out why Wonderware will not reset a tag. Its a time base tag. Anyhow here is my issue.
I can't seem to go online with the 1769-L23E-QBFC1 compact logic controller processor. It is using revision 20.14. Also I have no spare backup of this main routine/program. I can't update the firmware because that will wipe out the processor if I'm not mistaken.
Its giving me Error 806-8004280A.
Error: tag used as a PLC-5 mapping file not found
Error: Failed to upload PLC file mapping information...
I believe this is due to only having Logix 5000 20.01 on this computer. I have read that you cannot use that and 20.03 on the same machine. I know have a whole disk set of Studio 5000 V12.06.00 thru 20.01.00. I also have versions 21.00 thru 24.00. Another laptop here does have version 20.03, however it doesn't have an activation on it. Therefore its pretty useless to me. I tried to load the 21.00-24.00 but it still wouldn't communicate to the processor.
I even tried to borrow an activation from this laptop running 20.01 to the one that is running 20.03 but I couldn't get it to work.
If I uninstall 20.01 and use 21.00 then it will not connect and tells me;
Logix Designer support for this firmware revision is not installed. Do y'all have any ideas on how I can possibly connect to it without getting an activation for the other laptop with 20.03? I don't seem to have the disk for 20.03 around here anywhere and no one in my company seems to have an activation I can use for a few days.
Any ideas would be greatly appreciated.
I am need of some help here. I have a 1769-L23E processor communicating to Wonderware Intouch. I just got on this project. I am trying to find out why Wonderware will not reset a tag. Its a time base tag. Anyhow here is my issue.
I can't seem to go online with the 1769-L23E-QBFC1 compact logic controller processor. It is using revision 20.14. Also I have no spare backup of this main routine/program. I can't update the firmware because that will wipe out the processor if I'm not mistaken.
Its giving me Error 806-8004280A.
Error: tag used as a PLC-5 mapping file not found
Error: Failed to upload PLC file mapping information...
I believe this is due to only having Logix 5000 20.01 on this computer. I have read that you cannot use that and 20.03 on the same machine. I know have a whole disk set of Studio 5000 V12.06.00 thru 20.01.00. I also have versions 21.00 thru 24.00. Another laptop here does have version 20.03, however it doesn't have an activation on it. Therefore its pretty useless to me. I tried to load the 21.00-24.00 but it still wouldn't communicate to the processor.
I even tried to borrow an activation from this laptop running 20.01 to the one that is running 20.03 but I couldn't get it to work.
If I uninstall 20.01 and use 21.00 then it will not connect and tells me;
Logix Designer support for this firmware revision is not installed. Do y'all have any ideas on how I can possibly connect to it without getting an activation for the other laptop with 20.03? I don't seem to have the disk for 20.03 around here anywhere and no one in my company seems to have an activation I can use for a few days.
Any ideas would be greatly appreciated.
Last edited: