ron7
Member
Hi
This time, I'm in another confusion.
I'm using L32ER PLC and panelview plus 7 hmi. I have 6 analog inputs. I scaled all these 6 inputs into the ladder.
Now I want to setup 5 setpoints for these analogs(namely, Hi, Hi-Hi, Lo,Lo-Lo,Normal) and these 4 is also be set through HMI. and alarms are also configured for these setpoints.
in this project, I'm using 4 VFDs. its rpm and flow rate are needed to set through HMI.
Any help from you is highly appreciated.
Thanks
Rons
This time, I'm in another confusion.
I'm using L32ER PLC and panelview plus 7 hmi. I have 6 analog inputs. I scaled all these 6 inputs into the ladder.
Now I want to setup 5 setpoints for these analogs(namely, Hi, Hi-Hi, Lo,Lo-Lo,Normal) and these 4 is also be set through HMI. and alarms are also configured for these setpoints.
in this project, I'm using 4 VFDs. its rpm and flow rate are needed to set through HMI.
Any help from you is highly appreciated.
Thanks
Rons