CANCF002
Member
Have a machine with a B&R PLC M 264 and the HMI froze when the run button is press. The HMI buts fine. Please advice
B&r plc m264
- Thread starter CANCF002
- Start date
CapinWinky
Member
I haven't ever actually worked with panelware and don't know anything about them, but if the HMI program is stored on some kind of memory card, you should be able to just buy a replacement HMI on ebay and hope that it's a hardware issue and not a corrupt memory card issue.
Since you're talking about a PLC that has been obsolete for multiple decades, you might want to look to look to the future. If the OEM is still in business, they can probably retrofit the machine with a C70 and some X20. If not and you have a drawing set, any B&R integrator should be able to pull it off.
Since you're talking about a PLC that has been obsolete for multiple decades, you might want to look to look to the future. If the OEM is still in business, they can probably retrofit the machine with a C70 and some X20. If not and you have a drawing set, any B&R integrator should be able to pull it off.
Similar Topics
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Hi All,
Someone at work has put a PLC system on my desk, that's just been taken off an idle production line.
He said "It's an S7 PLC. We don't...
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...