Hi guys
I have never used a logo comfort before but trying to save a bit of money using a second hand unit
I have a project where we would like to add a delay timer for a activation of dump valve to return (it’s a conveyor that drops when the relay is not active)
What I have come up with is When a healthy input from a machine up stream is active in I1 it goes to a latched relay , the latched relay sets off a timer which is in a rung that turns on Q1
If I wanted to add A product sensor that if it is active for a set timer don’t active the Q1 until there is no product
Only for a one operation until we have Q1 active
Any ideas how I can achieve this thanks
I have never used a logo comfort before but trying to save a bit of money using a second hand unit
I have a project where we would like to add a delay timer for a activation of dump valve to return (it’s a conveyor that drops when the relay is not active)
What I have come up with is When a healthy input from a machine up stream is active in I1 it goes to a latched relay , the latched relay sets off a timer which is in a rung that turns on Q1
If I wanted to add A product sensor that if it is active for a set timer don’t active the Q1 until there is no product
Only for a one operation until we have Q1 active
Any ideas how I can achieve this thanks