Consider two control panels 100 meters apart. Customer is to run fiber between them so the PLC can talk to the HMI. Each panel has an A/B Stratix 1783-US6T2H switch that has 2 FE singlemode preinstalled fiber SFP modules with dual LC connector type.
Customer is in another country with a weird looking alphabet so there is a language barrier. They seem to think that I also need to provide “Fiber Patch Cords and Fiber Ports as well as Fiber Optic Patch Panels (OJ)”.
I’m not sure what they are asking for. I figured they would get 100m of fiber and have somebody install an LC connector on each end and plug them in. What am I missing? I know next to nothing about fiber. Tried to do a web search but came up empty.[FONT="]
[/FONT]
[FONT="]Picture of switch is attached.[/FONT][FONT="]
[/FONT]
[FONT="]Thanks for the help.[/FONT][FONT="]
[/FONT]
Customer is in another country with a weird looking alphabet so there is a language barrier. They seem to think that I also need to provide “Fiber Patch Cords and Fiber Ports as well as Fiber Optic Patch Panels (OJ)”.
I’m not sure what they are asking for. I figured they would get 100m of fiber and have somebody install an LC connector on each end and plug them in. What am I missing? I know next to nothing about fiber. Tried to do a web search but came up empty.[FONT="]
[/FONT]
[FONT="]Picture of switch is attached.[/FONT][FONT="]
[/FONT]
[FONT="]Thanks for the help.[/FONT][FONT="]
[/FONT]